Product Description                                        

     FC167D anti-theft alarm host is specialized for mobile phone, digital camera, notebook,Ipad controller

design, is combined the alarm host anti-theft, charging functions and integration; it is convenience for the

customers to see display products and Prevent your displaying electronics from stealing.

Basic Specification                                                              

Product Features                            

Display Advantages:

1. Quick Reaction speed, pull or cut the USB cable, the Alarm warning.

2. With self-test function design, the factory settings to default the port is turned off, the alarm

power USB port to connect the device host to detect the port, and take the initiative to close the

idle port (idle port will automatically turn off, not man-made blockage), access device port detected

automatically in the security state

3. Once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key

to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety

factor, it can protect customer's property.

4. Built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can

avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line,

greatly improving security. (If necessary, user can add an external speaker on the wall or easy to

hear the alarm sound, the external speaker jack plug into the rear side host).

5. With Remote function, easy to use (can order extra remote controller, if necessary).

6. LED light display each port current status.

7. USB interface, Ring Type, Mini End selectable, the cable length can be requested.

8. Wide range Application: Digital store, Electronics stores or exhibition in notebook, Tablet PC,

Cameras, Smart phone, MP3, MP4 and the GPS and other exhibits anti-theft and reusable.

Product Operation                                                             

1. Connect one end of the cable to the alarm (USB port), the other end connected to the object.

2. The Adaptor jack plug into the alarm (on rear side).

3. The power supply plug into AC outlet, the alarm horn chirping sound, the power is ON, the alarm panel

turn ON indicator LED corresponding port, the host is already in the security state (in active position).

4. Press red key on remote control to relief alarm, the alarm panel LED turns OFF.

5. If the installation of equipment to port which way the light does not illuminate, indicating which way is

not connected, reconnect until the LED lights ON.

6. When the anti-theft device was break, or off line, the host immediately chirping alarm, while the

corresponding port indicator light flashes, the staff on duty should be checked in the equipment of the

ports and pay attention to whether there is "theft" by. Need to disarm the alarm status; you can press the

Reset button (or remote button) to lift alarm.

Product Caution                                                                      

1. The host of the alarm should be placed in a more hidden and usually do not often encounter while on the

other articles below, to avoid the alarm sound to be concealed.

2. Open daily alarm and be sure to check the connection is connected, just open for the proposed increase

in security should be reset once to do self-inspection, self-test and observe the corresponding port light is

lit.

Product Packing                                                                    

Accessories:

1. FC167D 10 Ports Anti-Theft Alarm Host

2. FC167D 10 Pcs (USB mini End cable, length ~6 feet).

3. SM-0222 (Universal Adaptor 5Vdc 6,000mA).

4. FC167 (Remote Control) optional.

5. FC167PMD (Smart Phone Metal Display) optional.

6. FC167CMD (Camera Metal Display) optional.

7. FC167TAD (Tablet Acrylic Display) optional.